DigiGUARD GoldLINE 1200
Designed, Engineered and Manufactured in Sri Lanka by Bravo Solutions, Bravo Programmable Digital Power Guard “DigiGUARDTM product line possesses proven protection with innovative technology backed by Comnet Labs Sweden, designed to provide Over Voltage, Surge, Under Voltage (sag, brown-out) and Overload protection at the AC mains. Bravo DigiGUARDTM is a totally unique fully automatic micro-processor controlled protective device, factory set to provide a safe operating window for the directly connected equipment. It is designed for a 230Volt 50Hz AC Mains electrical supply. Its performance is tested and certified by ACCIMT, . DigiGUARD GoldLINE 1200 comes with a IEC61643 certified Surge Protector Module Built-it giving further enhanced protection to your valuable appliances.
As soon as the AC voltage supply moves outside the safe operating window depicted by the operating mode, it immediately switches OFF power to the protected equipment and remains OFF until a safe mains supply voltage is detected, giving sensitive equipment proper protection when needed. It also provides the connected equipment with a vital minimum time delay before power is restored. The IEC61643 certified Surge Protector module gives protection against Lightning Surges or any other high voltage spikes generated within the house or from the neighbourhood.
Unlike lower quality products in the market, Bravo DigiGUARDTM is not earth dependent or Amperage Imbalance Reacting, therefore events such as loss of a Neutral line and the resultant continuous high voltage is rapidly detected and protection is activated in a split second (Thanks to 8-bit DSP Microprocessor technology), without damaging your vital electrical or electronic equipment. DigiGUARDTM also indicates the supply voltage variations clearly on the LED screen. This is what we call reliable protection 24/7.
- Installation and Operation
- Appliances that can be Protected
- Inspection and Changing the fuse
- Connection Diagram
Install the DigiGUARD GoldLine 1200 in a dry and dust-free location inaccessible to Children. Never place the product on ground connected to an extension cord. Wall plugging is highly recommended and is the designed method of installation. This product should be plugged into a good quality square type (13A) wall socket. Never connect through Multi-Plug connectors since this will not ensure a firm connection. The weight of the Power Guard and the appliance’s power cord should be handled by the wall socket.
This is a PLUG and PLAY device. Proper wall socket connection is essential.
During Power startup, select the proper operating mode using UP/DOWN keys for your desired appliance. Refer to the user manual for more details.
- Fridge, Deep Freezer, Bottle Cooler (Inverter and Non-Inverter type)
- LED/ LCD/ Plasma Televisions
- Conventional CRT Televisions
- HiFi Setups, Surround Sound Systems
- Laptop, Desktop, Tablet computer
- Microwave oven (Domestic)
- Rice cooker (Domestic)
- Satellite TV systems
- CCTV camera systems
- Networking Devices( Routers, Switches, Servers)
- Home Security systems
- Pedestal Fans
- Wall Fans
** Any Appliance that consumes less than 1200W can be protected by this product.
- High Voltage, Overload and Level-3 IEC 61643 Certified Surge Protection
- Low Voltage Protection
- 8-bit microcontroller controlled
- Startup Delay bypass
- Auto Resetting Startup Delay
- Voltage Re-entry Hysteresis
- Digital Voltage Indication
- 1200W Power handling for continuous useage & 1500W power handling for short periods of time.
- Overload Protection
If the Power Guard is not working, it can be a fuse failure. The fuse is designed to get burnt during an Overload or High Voltage condition, thus preventing further damage to the electronics of the DigiGUARD and the connected appliances. There are two fuses protecting the Live wire and the Neutral wire separately through the Built-in Surge Protector. The fuse for the Live wire is located inside the Power adapter plug. Open the plug using a screwdriver and replace the fuse with a similar one (13A fuse is factory installed). Do not pull out the connected wires too much since that can damage the internal circuitry. The other fuse is protecting the Neutral wire and is located outside as a conventional screw type fuse. 7A fuse is factory installed for Neutral Line Protection.
Always send our products to the factory for any other repairs. Never give this unit to other repair technicians since that may damage the internal circuitry beyond repair.